Non-Adjacent Site Search |
(Trunking System, General) |
![]()
Enables the radio to
search its CPS-programmed list
of Control Channels for a site
with a stronger signal. This allows the radio the ability to roam-to and
use a site that is not
FNE (Fixed Network Equipment) defined as being adjacent to the radio's
current home site, but does have an "Acceptable"
or stronger signal.
This is only
true when the current home site and its FNE-defined adjacent sites are
all registering
at a certain threshold amount below the CPS-defined RSSI
Acceptable Threshold level. This feature applies for the current Trunking System.
![]()
|
When operating in a poor coverage area, this feature causes the radio to search the CPS-programmed list of Control Channels approximately once every two minutes. During this search time, the radio is not monitoring the home site's control channel and therefore may miss some audio. Based on the number of Control Channels contained within the appropriate Control Channels list for this Trunking System, this search could take up to 4 seconds. |
![]()
When the Coverage Type field is not set to "Disabled", and
when the radio is model / option capable.